Troubleshooting surface scratches with additives in DIY 1K WB acrylic clear wood varnishes

DIY water-borne clear varnishes are an important market segment that allows non-professional painters to paint themselves. They do not require specialized spraying equipment, and their coatings are easy to apply. They must also be resistant to everyday use, e.g. scratches caused by cleaning, accidental moving of objects or abrasions. One of the properties that canContinue reading “Troubleshooting surface scratches with additives in DIY 1K WB acrylic clear wood varnishes”

What is coatings mar resistance

In many applications, coatings require resistance to accidental damage, such as scratches or dents caused by moving objects on them. One of such applications are coatings of furniture paints, which, in addition to a number of properties such as blocking resistance or resistance to household chemicals, also need resistance to accidental scratches caused by movingContinue reading “What is coatings mar resistance”

Elimination of mudcracking in latex paints by microfibrillated cellulose additives

The application of thick layer water based latex paints is generally seldom made on purpose. Typically wet film thicknesses of 25 – 50 µm (1 – 2 mils) are applied and generally very little is exceeded when wet film is exceeded 100 µm (4 mils) per wet film application. Of course, specially selected latex paintsContinue reading “Elimination of mudcracking in latex paints by microfibrillated cellulose additives”

Washability of low sheen paints based on VAE-emulsion from renewable resources

Sustainable development and the circular economy is not a vision of the future, but the present in the perception of raw materials, also for the production of latex paints. Modifications of the formulations to make them more ecological is not only the elimination of VOC / SVOC, but a real concern for resources in theContinue reading “Washability of low sheen paints based on VAE-emulsion from renewable resources”

Influence of water used for the production of paint on the hydration of mineral thickeners

Mineral thickeners (attapulgites, smectites) form a gel with water after the water penetrates the lamellar layers. The created colloidal form turns out to be effective to varying degrees as a thickener in latex paints. The slide below shows that in some cases of mineral thickeners, the obtained rheological properties may depend on the water withContinue reading “Influence of water used for the production of paint on the hydration of mineral thickeners”

Pure acrylic latex plug and play replacing in the formulations. Not so obvious

Replacing polymer dispersion in recipes is a frequent procedure that precedes the market situation, e.g. lack of raw materials, the need to optimize prices or quality reasons, e.g. the desire to modify the formulation to improve the parameters of latex paint. Not every pure acrylic (PA) polymer dispersion brings appropriate properties to the formulation, suchContinue reading “Pure acrylic latex plug and play replacing in the formulations. Not so obvious”

Influence of hydrophobically modified HEC on the viscosity of latex paints

Cellulose ethers are an inseparable element of dispersion paints, especially with medium-high and high PVC where the proportion of polymer dispersion is not too high. They are one of the most commonly used wall and ceiling dispersion paint thickeners on the EMEA and Asia-Pacific markets. One of the basic and very common cellulose thickeners isContinue reading “Influence of hydrophobically modified HEC on the viscosity of latex paints”

The flash point of coalescing agents for water-borne paints

Flash point is a parameter that is usually associated first with solvents and solvent-based paints. Flammability pictograms are usually found on such products. It should also not be forgotten that the coalescents present in many water-borne paints are also organic compounds showing vapor pressure, which under appropriate conditions show a flash point. These tests areContinue reading “The flash point of coalescing agents for water-borne paints”

The range of laboratory tests used to evaluate stain resistant latex paints

Wall paints in terms of stain resistance are experiencing their extraordinary growth. However, not all companies have properly prepared formulations yet, because the preparation of paints that will be resistant to everyday stains and enable their easy removal is extremely difficult and requires extensive knowledge in the field of raw materials and tests to verifyContinue reading “The range of laboratory tests used to evaluate stain resistant latex paints”

Determination of pot-life of 2K WB epoxy paints according to ISO 9514

Two-component paints (or multiple-component paints) require the addition of a cross-linking agent prior to application. However, it is very important to know about the time the paint should be used up after mixing with the hardener or other recommended crosslinking ingredient. Often, in two-component paints, the determinant is an increase in viscosity that prevents furtherContinue reading “Determination of pot-life of 2K WB epoxy paints according to ISO 9514”